Fluoroelastomer Rubber Are Used in Applicable Situation of High and Low Temperature.

• Material: Fluorocarbon Rubber
• Usage: Industrial Rubber Slab, Industrial, Flooring, Printing, Rubber Floor Covering
• Feature: Wear-resistant, Impact-resistant, Heat-resistant, Corrosion-resistant, Insulating, Cold-resistant
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: Thickness 1-50mm*Width0.2-3meters*Length1-30m
• Raw Materials: Synthetic Rubber, Pad
• Medium: Pure Gum Rubber Sheet and Fabric
• Performance: Insulating Rubber Slab
• Color: Black, Red, Green and So on.
• Abrasion Resistant: -
• Insulation: -
• Cold Resistant: -
• Heat-Resisting: -
• Anti-Aging: -
• Ozone Resisting: -
• Transport Package: Plastic Film and Wooden Pallets
• Specification: Various specifications
• Trademark: Prima industrial
• Origin: China
• HS Code: 40082100
• Production Capacity: 30 Tons/Day

Product Description

This fluororubber material is resistant to extreme conditions, including all aliphatic, aromatic and halogenated hydrocarbons, acids, animal and vegetable oils. It should not normally (without specialised blending) be used with ketones, low molecular weight esters and nitro containing compounds.
Temp. range from -20 to +300°C
Standard
Colour:Black, 
Tensile strength :from 6MPa to 12MPa,
Hardness: 60-80 sh.a

The characteristics of other various rubber are as follows:
you can Select products according to the working condition.
Standard Thickness :from1mm to 50mm (only Silicone rubber sheet thicknes 0.1mm to 50mm)
Color:Black,red,grey etc.
The Inserted  rubber sheet with 1 Ply,2PLY 
Thick: 1.8-30mm width: 1-2m Length: 1-50m
and all the rubber sheet can make double size or one side fabric/cloth finish. 
If you want to learn more details abouth these products conctact us
 

Materials name	CHARACTERISTICS	SPECIFICATIONS	TEMP RANGE
NR(natural rubber	Natural Rubbers have high  content of natural latex.Natural Rubbers are generally resistant to moderate chemicals, wet or dry organic acids, alcohols, ketones and aldehydes. They are not normally suitable for ozone (unless in the case of bridge bearing qualities of BS1154,they have added anti-oxidant additives), strong acids, oils, greases and most hydrocarbons	T1-30mm*W1-2m*L1-30m Standard colour: Black,brown,white,green,blue,Red etc.	-20 to +70°C
SBR	SBR is a synthetic polymer with similar properties to Natural rubber. Because of this, it is often compounded to exhibit properties not normally associated with a Natural compound, such as extended ozone resistance, and is also blended with other rubbers to enhance features such as tensile strength and elasticity.	T1-30mm*W1-2m*L1-30m Standard colour:Black,white,green,blue,red etc.	-20 to +70°C
CR(Neoprene)	Neoprene is one of the most widely used rubbers across a broad spectrum of industries.With its resistance to moderate chemicals and acids, ozone, oils, fats, greases and many solvents, it is one of the most useful 'all-round' polymers available. It should not be used in conditions with strong oxidising acids, esters, ketones, chlorinated aromatic and nitro hydrocarbons however.	T1-30mm*W1-2m*L1-30m Standard colour:Black,white,green,blue,red etc.	-30 to +110°C
NBR(Nitrile)	Nitrile (often specified by their chemical group Butadiene Acrylonitrile Copolymer or NBR), have been used since their introduction, in environments where oils are dominant, although the material has now gained other significance for various industrial uses.Nitrile is generally resistant to many hydrocarbons, fats, oils, greases, hydraulic fluids and chemicals, but can be attacked by ozone, ketones, esters, aldehydes, chlorinated and nitro hydrocarbons. Blended with PVC for instance, the material exhibits a good level of resistance to ozone, and again, through blending with various polymers, many restrictions can be eliminated, making this polymer another widely used compound.	T1-30mm*W1-2m*L1-30m Standard colour:Black,white,green,blue,red etc.	-30 to +110°C
EPDM	EPDMis generally known for it's good ozone and water resistance. It also suitable for use in animal and vegetable oils, fats, greases and strong oxidising chemicals. It is also seen as the standard polymer for potable water applications and we can offer qualities to WRc (WRAS) approvals, The material should not be used with mineral oils, solvents or aromatic hydrocarbons however	T1-30mm*W1-2m*L1-30m Standard colour:Black,white,green,blue,red etc.	-30 to +150°C
Q(silicone rubber)	Silicone is a low and high temperature resistant rubber (can be formulated to withstand temperatures as low as -118°C and as high as +316°C). It is non-staining, odourless, tasteless and generally inert and is widely used in medical and food applications. Coupled with these features the material shows excellent resistance to many chemicals, weathering, oxidation and liquid immersion (very low water absorption) along with excellent thermal and electrical resistant qualities.	T1-10mm*W1-2m*L1-30m Standard colour:Transparent ,white,red etc.	-40 to +200°C
FPM(Viton rubber)	This material is resistant to extreme conditions, including all aliphatic, aromatic and halogenated hydrocarbons, acids, animal and vegetable oils. It should not normally (without specialised blending) be used with ketones, low molecular weight esters and nitro containing compounds.	T1-20mm*W1-2m*L1-30m     Standard colour:Black	-20 to +300°C